Standards
EN 353-2
Precio neto:
Demande de prixRef. no.:
AC011
Index:
AC011_002_S/G|PL####
Marque:
PROTEKT
Sécurité pour un poids utilisateur maximum de 140 kg
Protection pour 1 personne
VG11 11.075 pour une utilisation horizontale où une chute sur un bord est probable (R> 0,5)>
Utilisation verticale et horizontale du dispositif
Mécanisme
Matériau:
acier galvanisé
Modèle mousqueton:
Dimensions:
130 x 57 mm
Ouverture:
19 mm
Poids:
220 g
Résistance statique:
20 kN
Type de dispositif de blocage:
cliquet de blocage
Mode de montage:
inamovible
Matériau
Structure:
acier
Finition
Structure:
zingué galvanisé
Amortisseur
Largeur:
32 mm
Matériau:
polyester
The BLOCMAX guided type fall arrester with an anchor line is a component of
personal protective equipment against falls from a height. The equipment is compliant with EN353:2. The AC011 device is designed for use with 14 mm diameter polyester anchor lines (working ropes) designated by the part number AC100.
The AC011 device is designed to protect one worker with a maximum weight of 140 kg. The AC011 guided type fall arrester equipped with a flexible anchor line has been successfully tested in accordance with PPE-R/11.075 (which is not covered by CE marking regulations) for use horizontally when a fall over an edge may occur.
During testing, a steel profile with a radius of r=0.5 mm was used, with no sharp edges or burrs. This testing has proved that the equipment is suitable for use on similar edges, e.g. rolled steel profiles, wooden beams or rounded roof parapets. The device comes in different lengths, from 5 m to 100 m.
Kits d’assurage
Antichutes à rappel automatique et descendeurs en rappel
Descendeurs en rappel
AZ002
